Generac whole-home standby systems — sized by load calculation, permitted with our own drawings, installed with a service-entrance rated transfer switch, and commissioned by us.
Oversizing wastes thousands; undersizing means the generator trips when the A/C starts. A real load calculation is the difference, and it belongs in the permit set.
A service-entrance rated switch is what lets the generator back the whole house safely. It also determines whether you need a service split.
Natural gas or propane, sized for the run and the demand. An undersized gas line is a common reason a new generator underperforms.
EV charging, electric heat, a spa — smart load management lets a smaller generator carry the house instead of buying a bigger one.
We calculate what the house actually draws and what has to run during an outage. That decides the unit — not a catalog table.
Power riser and load calculation produced by us as electrical contractor of record. No engineering fee and no dealer markup.
Where the design calls for it, we split the service and set a service-entrance rated transfer switch so the whole house is backed.
Unit set, gas coordinated and connected, conductors run, load management configured for the loads that need it.
We start it, run it under load, walk you through the exercise schedule, and activate the warranty ourselves. No third-party handoff.
The power riser and the load calculation come from us as contractor of record. On a dealer install that is a separate line item.
Buying through a dealer network adds a margin on top of the unit and the labor. We install as the licensed electrical contractor, directly.
Sizing, permit, install, gas coordination, commissioning and warranty activation — all from us. When something needs attention, there is nobody to point at.
It depends on what has to run during an outage. A recent whole-home install we did is a 24kW natural-gas Generac backing an entire home including EV charging and a spa. Yours could be smaller. The load calculation decides.
Natural gas if you have a line — no tank, no refueling. Propane where gas isn’t available. Either way, the line has to be sized for the demand, which is a common miss.
Sometimes. A service split with a service-entrance rated transfer switch is often the cleaner answer. The load calculation tells us before you commit.
We do. We commission the unit and activate the warranty directly, so there’s no dealer between you and the manufacturer.
With smart load management, usually yes — the system sheds the charger while the A/C starts. That’s exactly the setup on our recent Tampa install.
"It’s hard to find reliable service these days, and this company exceeded my expectations. Highly recommend for anyone needing electrical work done. Edgar and his team completed the job efficiently and cleaned up afterward."
— LAURA BANEGAS · GOOGLE REVIEWTell us what has to stay on during an outage and we’ll calculate the rest.
